– Bulk Density g/cm3 ISO 60 ca. 0.56 Particle Size Distribution ISO 13320-1 D > 250 µm % Max. 5 D < 63 µm % Max. 3 Volatile Matters % ISO 1269 Max. 0.3 Residual Monomer ppm ASTM D 3749 Max. 1 *
The values indicated typify the means obtained from quality control, based on large number of individual results, with a statistical distribution within the normal production tolerances
K Values: K70
K value – ISO 1628-2 ca. 70
– Bulk Density g/cm3 ISO 60 ca. 0.49 Particle Size Distribution ISO 13320-1 D > 250 µm % Max. 5 D < 63 µm % Max. 4 Volatile Matters % ISO 1269 Max. 0.3 Plasticizer Absorption % ISO 4608 ca. 35 Residual Monomer ppm ASTM D 3749 Max. 1 *
The values indicated typify the means obtained from quality control, based on large number of individual results, with a statistical distribution within the normal production tolerances
K Values: K64
TYPE – Polyvinyl chloride made by suspension polymerisation.
APPLICATIONS Rigid profiles, pipes, flexible profiles, plasticised hoses, cable insulation and sheathing, plasticised film and sheet.
PROCESSING TECHNIQUES Extrusion, calendering. Crystal-clear articles. CHARACTERISTICS UNITS VALUES (*) TEST METHODS
K value – 64 ISO 1628-2
– Apparent bulk density g/l 540 ISO 60 Sieve analysis : – retained on 0.063 mm sieve – retained on 0.250 mm sieve % ≥ 90 ≤ 2 ISO 1624 Volatile content % ≤ 0.3 ISO 1269 Residual Vinyl chloride monomer ppm < 1 ISO 6401 (*)
In the case of certain characteristics, the values given in this data sheet are means based on a large number of individual measurements distributed around the means in a range corresponding to the normal manufacture and measurement tolerances.